2017 - Tune Up Day - May 13th

[John]

my bus could use a little light sanding and a little fresh paint,

A gallon of Sears Weatherbeater and a roller? We can do that!

lol, bruce of all the vw guroo s out there , you should know--- the solution to the issue can not be the same as the problem on hand...

john; sullivan;200

[Kooper271]

my bus could use a little light sanding and a little fresh paint,

A gallon of Sears Weatherbeater and a roller? We can do that!

http://www.rickwrench.com/index79master ... paint.html

[John]

https://www.leakoil.net/forum/viewtopic ... 002#p22002
last page,
been there done that,


hillbilly;44880 ---oh:io

[douge]

Does someone have the correct reamer to install center pin bushings in an early bus, without removing the beam from the vehicle?

[Dual Port]

Does someone have the correct reamer to install center pin bushings in an early bus, without removing the beam from the vehicle?

http://leakoil.net/forum/viewtopic.php? ... &start=360

[Kooper271]

What time on the 13th?

[Dual Port]

I'll be there early, like 8, most people will probably float in about 9-10 IIRC from previous TUD, bringing donuts and stuff. Work is busiest in the middle of the day with lunch provided by the LOL. Thing usually slow down in the afternoon when the beer comes out.

I'll have tables and chairs, the LOL will be mostly in charge of food, and I'm not much of a beer drinker so don't expect my fridge to be full of beer. All work will be first in, first out, no reservations. I have tools and some parts, but I'd suggest bringing parts if you can. It's rain or shine, there will be cover and heat if the weather is bad.

[Marla]

So far we have had volunteers who have stated that they will be bringing chili, and a pot of Kielbasa and Kraut. No LEAKOIL event is official unless there are hot dogs, so we will have the machine going with buns and condiments.

A pot coffee will be brewing early. I am planning on bringing a pastry of some sort, may even be donuts if I don't get around to baking.

People can bring whatever you would like to share or not share. Even if you don't have a project to work on, it is fun to hang around and watch. I learn something every year.

[ohiowesty]

i will bring german and belgian beer and a borescope camera that fits through the spark plug hole, for inspecting pistons and valves. Or nostrils and ears.

[Marla]

Just a reminder....

I will have shirts on Saturday. All pre-orders are pulled and sorted. If you owe money, bring it with you, I will be handing them out. I also have a few extra to sell if you didn't get an order in and would still like to buy one.