LEAKOIL Forum

Ok, Ive got it running and driving. It hasn't seen the pavement since its expired registration sticker of 1993 until last weekend. Now its time to quiet her down so I jacked it up and started to remove the exhaust. As you can see everything was completely shot from the heads back. Broke one exhaust stud off on one side. Any suggestions on how to back it out?

...

like Aaron said,also soak the piss out of it with PB where the stud enters the head.Good luck.
Bill

Got it soaking -

I think I will take your advice Bill and set it up with the 72-74 set up.

Cip has a 10 percent off deal going on right now.

If you are going to scrap the old stuff I will give you a few bucks for it.

CraigOnTheBoat wrote:Got it soaking -

I think I will take your advice Bill and set it up with the 72-74 set up.

Cip has a 10 percent off deal going on right now.

You will have to find a driver side stove pipe also,thats the piece that attaches to the heater box outlet that the flapper sits on top of. The 72-74 boxes have a round outlet on the dr side as opposed to the oval shape of the 75-78. You can pound your oval one round if we can't find the correct one.
Bill

...

Thanks I will need them. Mine are totally junk, my control boxes are trash too.

Toolbox your welcome to my scrap pile - Come and get it, (free)

CraigOnTheBoat wrote:Toolbox your welcome to my scrap pile - Come and get it, (free)

As Thomas Edison said, "You can't become a good inventor without a good junk pile".

CraigOnTheBoat wrote:Thanks I will need them. Mine are totally junk, my control boxes are trash too.

Toolbox your welcome to my scrap pile - Come and get it, (free)

Craig,

Probably won't be down that way till KI. Let me know if that works.

Ted